Custom Search

EC1302: DIGITAL SIGNAL PROCESSING SEM / YEAR: V / III

DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING
QUESTION BANK
SUBJECT CODE : EC2302 SEM / YEAR : V / III
SUBJECT NAME : DIGITAL SIGNAL PROCESSING

UNIT-I :DISCRETE FOURIER TRANSFORM
PART - A
TWO MARKS:
1. Define about DFT and IDFT?
2. Find the values of WN
k ,When N=8, k=2 and also for k=3.
4. Draw the radix-2 FFT–DIF butterfly diagram.
5. Draw the radix-2 FFT–DIT butterfly diagram.
6. What is the necessity of sectioned convolution in signal processing?
7. Define Correlation of the sequence.
8. State any two DFT properties.
9. Why impulse invariant transformation is not a one-to-one mapping?
PART - B
1. a) Compute 4- point DFT of casual three sample sequence is given by,
x(n) = 1/3, 0_n_2
= 0, else (10)
b) State and prove shifting property of DFT. (6)
2. Derive and draw the radix -2 DIT algorithms for FFT of 8 points. (16)
3. Compute the DFT for the sequence {1, 2, 0, 0, 0, 2, 1, 1}. Using radix -2 DIF FFT and
radix -2 DIT- FFT algorithm. (16)
4. Find the output y(n) of a filter whose impulse response is h(n) = {1, 1, 1} and input signal
x(n) = {3, -1, 0, 1, 3, 2, 0, 1, 2, 1}. Using Overlap add overlap save method. (16)
5. In an LTI system the input x(n) = {1, 1, 1}and the impulse response h(n) = {-1, -}Determine
the response of LTI system by radix -2 DIT FFT (16)
6. Find the output y(n) of a filter whose impulse response is h(n) = {1, 1, 1} and input signal
x(n) = {3, -1, 0, 1, 3, 2, 0, 1, 2, 1}. Using Overlap save method (16)

UNIT-II: INFINITE IMPULSE RESPONSE DIGITAL FILTERS
&
UNIT-III: FINITE IMPULSE RESPONSE DIGITAL FILTERS
PART - A
TWO MARKS:
1. Differentiate IIR filters and FIR filters.
2. Write the characteristics features of Hanning window
3. Define pre-warping effect? Why it is employed?
4. Give any two properties of Butterworth filter.
5. When a FIR filter is said to be a linear phase FIR filter
6. Write the characteristics features of rectangular window.
7. Write the expression for Kaiser window function..
9. Write the characteristics features of Hamming window
10. Why mapping is needed in the design of digital filters?
PART - B
1 . With a neat sketch explain the design of IIR filter using impulse invariant transformation. (16)
2. Apply impulse invariant transformation to H(S) =
(S +1) (S + 2)
with T =1sec and find H(Z). (16)
3. For a given specifications of the desired low pass filter is
0.707 _ |H(_)| _1.0, 0 _ _ _ 0.2_
|H(_)| _ 0.08, 0.4 _ _ _ _ _
Design a Butterworth filter using bilinear transformation. (16)
4. Explain the procedural steps the design of low pass digital Butterworth filter and list its
properties. (16)
5. The normalized transfer function of an analog filter is given by,
1
Ha(Sn)= Sn
2 + 1.414Sn +1
with a cutoff frequency of 0.4 _, using bilinear transformation. (16)
.
6. List the three well known methods of design technique for IIR filters and explain any one.(16)
7. Design a low pass filter using rectangular window by taking 9 samples of w(n)
and with a cutoff frequency of 1.2 radians/sec.
Using frequency sampling method, design a band pass FIR filter with the following
specification. Sampling frequency Fs =8000 Hz, Cutoff frequency fc1 =1000Hz, fc2 =3000Hz.Determine the filter coefficients for N =7. (16)
8. Design an ideal high pass filter with Hd(ej _) = 1 ; _/4 _ | _| _ _
= 0 ; | _| _ _/4 Using Hamming window with N =11 (16)
9. Determine the coefficients of a linear phase FIR filter of length N =15 which has a symmetric
unit sample response and a frequency response that satisfies the conditions
H (2 _k /15) = 1 ; for k = 0, 1, 2, 3
0.4 ; for k = 4
0 ; for k = 5, 6, 7 (16)
10. Design and implement linear phase FIR filter of length N =15 which has following unit sample
sequence H(k) = 1 ; for k = 0, 1, 2, 3
0 ; for k =4, 5, 6, 7 (16)
11. Convert the analog filter in to a digital filter whose system function is
S + 0.2 H(s)= ---------------- .Use Impulse Invariant Transformation .Assume T=1sec (16)
(S + 0.2)2 + 9
1
12. The Analog Transfer function H(s)= ----------------.Determine H(Z) .Using Impulse (S+1) (S+2) Invariant Transformation .Assume T=1sec . (8)
13. Apply Bilinear Transformation to H(s)= ------------- with T=0.1 sec. (8)
(S+2)(S+3)

UNIT IV FINITE WORD LENGTH EFFECTS
PART - A
TWO MARKS:
1. What are the effects of finite word length in digital filters?
2. List the errors which arise due to quantization process.
3. Discuss the truncation error in quantization process.
4. Write expression for variance of round-off quantization noise.
5. What is sampling?
6. Define limit cycle Oscillations, and list out the types.
7. When zero limit cycle oscillation and Over flow limit cycle oscillation has occur?
8. Why? Scaling is important in Finite word length effect.
9. What are the differences between Fixed and Binary floating point number representation?
10. What is the error range for Truncation and round-off process?
PART - B
1. The output of an A/D is fed through a digital system whose system function is
H(Z)=(1-_)z /(z-_), 0<_<1.Find the output noise power of the digital system. (8)
2. The output of an A/D is fed through a digital system whose system function is
H(Z)=0.6z/z-0.6. Find the output noise power of the digital system=8 bits (8)
3. Discuss in detail about quantization effect in ADC of signals. Derive the expression for Pe(n) and SNR. (16)
4 a. Write a short notes on limit cycle oscillation (8)
b. Explain in detail about signal scaling (8)
5. A digital system is characterized by the difference equation
Y(n)=0.95y(n-1)+x(n).determine the dead band of the system when x(n)=0 and y(-1)=13. (16)
6. Two first order filters are connected in cascaded whose system functions of theIndividual sections are H1(z)=1/(1-0.8z-¹ ) and H2(z)=1/(1-0.9z -¹ ).Determine theOver all output noise power. (16)

********